Rockwell Automation 1771-TCM TEMPERATURE CONTROL - Manual (Page 63)

8–2 Documenting Projects, Modules, and Loops
Publication 1771Ć6.4.5 - January 1997
To print a single module or loop:
1. Open the Module Manager screen on the project containing the
module or loop you wish to document.
2. Select the module or loop you wish to document.
3. From the
Project menu, select Print to produce a printed report, or
Print Preview to view the report on the screen.
A dialog box appears, prompting you to select File or PLC.
4. Select the set of values you wish to document.
The Print dialog box appears.
5. Make sure the
Selection box is checked; if you are printing to a
printer, be sure the printer information is correct and click on
OK.
The report is printed or displayed on the screen.
Printing a Single Module
or Loop