Rockwell Automation 1771-TCM TEMPERATURE CONTROL - Manual (Page 6)

Preface
Publication 1771Ć6.4.5 Ċ January 1997
Using this Manual
This manual describes the use of Temperature Control

configuration software for use with the Temperature Control module
(1771-TCM, series C). For information on how to install the module
or how to generate the necessary ladder-logic programming for
operating the module with this configuration software, see
publication 1771-6.5.120. This ladder logic is provided with your
Temperature Control configuration software as well.
Use this manual if you are responsible for installing the Temperature
Control software, or using it to configure, tune, or operate the
temperature control loops. You must be able to program and operate
an Allen-Bradley programmable controller to make efficient use of
your Temperature Control module. In particular, you must know
how to program block-transfer instructions. If you do not, refer to
the appropriate PLC

programming manual before you attempt to
generate a program for this module.
The following conventions are used throughout this manual:
•
User prompts are shown in fixed-pitch type:
c:\
•
Text that you enter literally is shown in bold fixed-pitch type:
a:\setup
•
A literal key stroke that can not be represented by a single
character is shown in bold type inside a box:
win Enter
•
Items displayed only on the screen are shown in plain type:
In the
Name field, enter . . .
•
Items on the screen that we tell you to select are shown in plain
bold type:
From the
Module menu, select Download.
We also use this convention to call attention to helpful information.
Who Should Use this
Manual
Conventions Used in this
Manual
"