Rockwell Automation 1771-TCM TEMPERATURE CONTROL - Manual (Page 27)

3–4 Organizing the Project File
Publication 1771Ć6.4.5 - January 1997
3. Select
OK.
The module list for the project appears, with the module added.
The new module will have 8 default loop names.
If you want to edit the project description that shows on the first
screen, from the
Project pull-down menu, you can select Description.
The project description is also printed when you print a project.
To change the Name, PLC Node, Port, Data Table Address, Rack,
Group, or Slot of an existing module:
1. At the Module Manager screen, select the module you wish to
modify.
2. From the
Module menu, select Modify.
The Modify Module dialog box appears, with the current settings
shown.
3. Make the desired changes and click on
OK.
To learn how to configure the temperature control module, read
chapter 4.
"
Modifying an Existing
Module
What to do next