Summary of changes, New information updated information – Rockwell Automation 1794-ID2 U.MNL INCREMENTAL ENCODER User Manual
Page 3
Summary of Changes
Publication 1794-UM015B-EN-P - May
2001
Summary of Changes
The information contained in this manual pertains to the series B
version of the 1794-ID2 frequency input module.
This version of this publication contains information on control word
2, for setting the filter function for the counters. This filter
information is contained in chapter 1 and identified in chapters 4
and 5.
The vibration specifications for this module have been updated. The
specification is as follows:
Environmental Conditions
Operational Temperature
Storage Temperature
Relative Humidity
Shock Operating
Nonoperating
Vibration
0 to 55
o
C (32 to 131
o
F) Note: Do not connect
maximum input voltage simultaneously to all
inputs if the module ambient temperature is
expected to exceed 40
o
C.
-40 to 85
o
C (-40 to 185
o
F)
5 to 90% noncondensing (operating)
5 to 80% noncondensing (nonoperating)
30g peak acceleration, 11(+1)ms pulse width
50g peak acceleration, 11(+1)ms pulse width
Tested 50g @ 10-500Hz per IEC 68Ć2Ć6
New Information
Updated Information