Rockwell Automation 1788-FFCT NI-FBUS Configurator User Manual - Manual (Page 32)

Publication 1788-UM052B-EN-P - April 2002
4-4 Using the NI-FBUS Configurator
Importing
Device Description Files To use Device Description (DD) files with the NI-FBUS Configurator,
you must import the DD files:
1. Select Start ⇒ Programs ⇒ NI-FBUS ⇒ Interface Config to run
the Interface Configuration utility.
2. Click DD Info.
The DD Info window opens.
3. Type the base directory for your DD files in the first field.
4. If necessary, click Browse to select your standard text
dictionary.
5. Click Import DD.
The Import DD window opens.
6. Click Browse and browse to the .ffo DD file path and click OK.
For more information about DD files, refer to the Device Description
Files section on page 1-5.