Rockwell Automation 1788-FFCT NI-FBUS Configurator User Manual User Manual
Page 43
Advertising
![background image](/manuals/579865/43/background.png)
Publication 1788-UM052B-EN-P - April 2002
Using the NI-FBUS Configurator 4-15
Defining Multiple Loops
A loop is a group of connected function blocks that execute at a
specified rate. You can define many loops in one Function Block
Application Editor window.
Figure 4.8 shows an example of two separate loops running at the
same rate.
Figure 4.8 Multiple Loops
Advertising