Rockwell Automation 1788-FFCT NI-FBUS Configurator User Manual - Manual (Page 47)

Publication 1788-UM052B-EN-P - April 2002
Using the NI-FBUS Configurator 4-19
Viewing and Editing
Function Block Parameters Each function block in your application has a Block window that you
can use to change block parameters and other settings. When you
read or write data on a block, the Status window shows the status of
the transactions.
To open the Block window for a block, do one of the following:
• Double-click on the name of the function block in the Project
window.
OR
• Double-click on a function block in the Function Block
Application Editor.
Figure 4.11 Block Window