Rockwell Automation 1788-FFCT NI-FBUS Configurator User Manual User Manual
Page 46
Advertising
Publication 1788-UM052B-EN-P - April 2002
4-18 Using the NI-FBUS Configurator
Changing the Block Execution Order
To change the execution order of the blocks, complete the following
steps:
1. In the Function Block Application Editor, click the Change
Execution Order button. Numbers appear on the blocks,
indicating their current order.
2. Click on the blocks in the order that you want them to execute.
3. When you are done, click on the background of the Function
Block Application Editor window or select another tool.
Advertising