Rockwell Automation 1788-FFCT NI-FBUS Configurator User Manual - Manual (Page 52)

Publication 1788-UM052B-EN-P - April 2002
4-24 Using the NI-FBUS Configurator
Updating Block Parameter Values
You can update block parameter values manually or automatically,
as described below:
Manually
To update each block parameter value manually, select the parameter
and click the Read Selected button on the Block window toolbar.
To update all of the block parameter values, click the Read All
button.
Automatically
To update the block parameter values automatically, complete these
steps:
1. At the top of the Block window, select the Periodic Updates
checkbox.
2. Select the poll rate from the drop-down list to the right of the
Periodic Updates checkbox.
The NI-FBUS Configurator updates the block parameter values
periodically, based on the poll rate you choose.