Rockwell Automation 1788-FFCT NI-FBUS Configurator User Manual - Manual (Page 62)

Publication 1788-UM052B-EN-P - April 2002
4-34 Using the NI-FBUS Configurator
Comparing Two Configurations
You can upload your current bus configuration and compare it against
a saved project. To do so, click the Verify and Diff button in the
Project window toolbar. You can also select Configure
⇒ Verify and
Diff Configuration.
The NI-FBUS Configurator uploads device parameter values, function
block schedules, trend and alarm connections, and function block
application linkages, and compares them with the saved
configuration. The NI-FBUS Configurator shows which components
are different, as shown in Figure 4.17.
Figure 4.17 Diff Window