Rockwell Automation 1747-PCIS API Software - Open Controller - Manual (Page 72)

Publication 1747-UM002A-US-P - June 2000
6-12 Library of Routines
Example:
HANDLE Handle;
int retcode;
retcode = OC_EnableEOSNotify( Handle, EOSMSG_ENABLE );
/* Use OC_PollScanner() to check EOS messages */
OC_EnableForces OC_EnableForces enables/disables forces for all inputs and outputs
with entries in the force files on the scanner.
Syntax:
int OC_EnableForces(HANDLE handle, int mode);
Parameters:
Description:
If no I/O forces are in the force files, OC_EnableForces does not
enable forces and instead returns an error. All forces are disabled by
default.
ATTENTION
!
Enabling forces will potentially change the output
data values that your application was previously
controlling.
Parameter: Description:
handle Must be a valid handle returned from OC_OpenScanner
mode If
mode
is:
FORCE_ENABLE forces are enabled
FORCE_DISABLE forces are disabled
FORCE_CLEAR forces are disabled and all input and output
forces are cleared from the force files.