Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 269)

Publication AG-UM008C-EN-P - February 2005
Configuring Modems 8-3
Figure 8.1
Typical Telephone Modem Configuration
Rockwell Automation Rockwell Automation offers the 9300-RAKIT as a dial-up modem
solution for connecting to Allen-Bradley processors. The 9300-RAKIT
includes a DIN rail mount telephone modem, an AC power adapter,
and cables and adapters needed to connect the modem to a PLC-5,
SLC, MicroLogix, or Logix processor serial port.
Figure 8.2 9300-RAKIT Modem
All connections, switches, and LEDs are located on the front of the
modem. The 8-48V dc power connection is made on the bottom of
the modem. At 24V dc, the modem draws 100 mA so it can be
powered from the processor 24V dc user power if available. You can
also use the 110V ac adapter for supplying power.
modem
modem
PLC-5
SLC 5/03, 5/04, 5/05
Connect to serial port
Power Requirements label (located
underneath modem).
Power Switch
Analog Phone Line only!
Profile Switches
LEDs