Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 321)

1 Publication AG-UM008C-EN-P - February 2005
Chapter
10
Using Dial-up Telephone Communication
Chapter Objectives This chapter helps you set up and initiate dial-up communication.
This chapter pertains to the enhanced PLC-5 processors, SLC 5/03,
5/04, and 5/05 processors, MicroLogix 1100, 1200, and 1500
controllers, and Logix processors.
If you are setting up a dial-up communication system for the first time,
refer to this chapter as well as to chapters 2, 3, 4, 7, and 8.
TIP
A Micrologix 1000 controller may be on the
receiving end of a dial-up modem connection
using an auto-answer phone modem, but it has
no means to cause its modem to initiate or
hang-up a phone modem connection.
For information about See page
overview 10-2
setting up the system 10-3
communicating over the telephone line 10-4
peer-to-peer communication 10-8
report-by-exception and/or master station-initiated
communication 10-9