Rockwell Automation 1797-IJ2 FLEX Ex Frequency Input Module User Manual
Flex ex frequency input module, Installation instructions, About this publication
Advertising
Publication
1797-5.9 - June 2010
Installation Instructions
FLEX Ex Frequency Input Module
Catalog Number 1797-IJ2
About This Publication
This publication provides information on selecting, installing, configuring,
and troubleshooting the 1797-IJ2 module.
Topic
Page
Important User Information
2
Removal and Insertion Under Power
European Community Directive Compliance
Wire to a 1797-TB3 or 1797-TB3S Terminal Base Unit
CE/CENELEC I/O Entity Parameters
UL, C-UL I/O Entity Parameters
Advertising
Table of contents
Document Outline
- 1797-5.9 FLEX Ex Frequency Input Module Installation Instructions
- About This Publication
- Module Installation
- Installation in Zone 1
- Installation in Zone 22
- When the module is installed in Zone 22, the following cabinets must be used: IVK-ISRPI-V16LC; IVK-ISRPI-V8HYW; or IVK-ISRPI-V8LC. These cabinets can be purchased from Pepperl+Fuchs GmbH, Lilienthalstrasse 200, 68307 Mannheim, Germany. Information aa...
- European Community Directive Compliance
- ATEX Directive
- Wire to a 1797-TB3 or 1797-TB3S Terminal Base Unit
- Wire the Module
- Ground the Module
- Indicators
- Resolution and Accuracy
- Input Map
- Output Map
- Repair
- Specifications
- CE/CENELEC I/O Entity Parameters
- Channel 0 Gate Input
- Channel 1 Gate Input
- Relay Output Parameters
- UL, C-UL I/O Entity Parameters
- FM Input I/O Entity Parameters
- Back Cover