2 electrical description – Rockwell Automation 61C613 16 Channel Analog Input Module User Manual
Page 11
Advertising
2Ć3
2.2
Electrical Description
The input module contains sixteen analog input channels with
softwareĆselectable features. These channels are connected through
a multiplexer to a dualĆslope integrating A/D converter. Each analog
input channel has 200 volt channelĆtoĆchannel isolation and 1000 volt
isolation to logic common. Each channel may be independently
configured to accept voltages ranging from +12.5 mVolts through
+10.0 Volts. Refer to figure 2.2 for a typical input circuit.
T/C 1
T/C 2
T/C 3
Oven
LT
FT
0 - 10V
4 - 20 mA
Figure 2.2Ć TypicalInput Circuit
An onĆboard microĆprocessor controls the analog/digital conversion.
A simple bus interface allows your application software to
send/receive commands to the module.
Advertising