Rockwell Automation 61C613 16 Channel Analog Input Module - Manual (Page 27)

4Ć11
4.4 Restrictions
This section describes limitations and restrictions on the use of this
module.
4.4.1 Rack Slot Location
This module cannot be used in a Remote I/O rack. A processor must
be present in the same rack as the module. The module may not be
used in slots 0 or 1 in a DCS 5000 rack.
If a microĆregulator is used in a DCS 5000/AutoMax rack, this module
may not occupy any slot within a group of slots reserved for the
microĆregulator. The two groups of slots reserved for the
microregulator are slots 5Ć8 and 11Ć14.
4.4.2 Reading and Writing Data
Data on the module can only be read or written as bytes. Location
(M+3) is read only and may not be written to by application software.