Rockwell Automation 61C544A RTD Module - Manual (Page 8)

1Ć2
D JĆ3750 AutoMax PROGRAMMING EXECUTIVE V3.0
INSTRUCTION MANUAL
D IEEE 518 GUIDE FOR THE INSTALLATION OF ELECTRICAL
EQUIPMENT TO MINIMIZE ELECTRICAL NOISE
INPUTS TO CONTROLLERS FROM EXTERNAL
SOURCES
1.2 Related Hardware and Software
The RTD module, M/N 61C544A, contains the following:
1. One RTD module
The following items must be purchased separately:
D Panel mount terminal board and cable assembly, M/N 61C545.
One is required for each set of eight channels (2 per module).
or
D DIN rail mount terminal board and cable assembly, M/N 61C546.
One is required for each set of eight channels (2 per module).
The RTD module can be configured with the hardware (purchased
separately) listed in figure 1.1.
Host Model Number
AutoMate 30, 30E M/N 45C301, 45C305, 45C307
AutoMate 40X, 40, 40E M/N 45C409, 45C410, 45C411
DCS 5000 M/N 57C407
AutoMax M/N 57C430A, 57C431, 57C435
AutoMate Remote
I/O Processor
M/N 45C201B
DCS 5000/AutoMax Remote
I/O Communication Module
M/N 57C416
Figure 1.1 Ć RTD Module Hardware Configuration