Rockwell Automation 6186-Mxxx Industrial Monitors User Manual - Manual (Page 13)

Publication 6186M-UM001J-EN-P - July 2008 13
Installing the Monitor Chapter 2
Environment and Enclosure
Information Review the information on enclosures and environments before
installing your computer.
ATTENTION
Environment and Enclosure
This equipment is intended for use in a Pollution Degree 2
industrial environment, in overvoltage Category II applications
(as defined in IEC publication 60664-1), at altitudes up to 2000
m (6561 ft) without derating.
This equipment is considered Group 1, Class A industrial
equipment according to IEC/CISPR Publication 11. Without
appropriate precautions, there may be potential difficulties
ensuring electromagnetic compatibility in other environments
due to conducted as well as radiated disturbance.
Operating the capacitive touchscreen version in a high noise
environment may cause the touchscreen to respond slowly to
touch inputs, or may cause the position of the screen cursor to
drift.
This equipment is supplied as open-type equipment. UL
recognized and hazardous location equipment must be
mounted in an enclosure that is suitably designed or rated for
those specific environmental conditions that will be present,
and designed to prevent personal injury resulting from
accessibility to live parts. UL Listed equipment need not be
mounted inside another enclosure in ordinary (nonhazardous)
locations if NEMA Type and IEC ratings are not required, but
the mounting method must limit the tilt of the product to +/-
30° from vertical. Examples include articulated arm, table-top
stand, or other means having sufficient mechanical stability.
The mounting means must be firmly attached to the supporting
surface using screws, bolts, or clamps so the monitor cannot
tip.
All units ship with a gasketed bezel to meet specified
NEMA and IEC ratings only when mounted in a panel or
enclosure with an equivalent rating. Subsequent sections of
this publication may contain additional information regarding
specific enclosure-type ratings required to comply with certain
product safety certifications.
Subsequent sections of this publication may contain additional
information regarding specific enclosure type ratings that are
required to comply with certain product safety certifications.
In addition to this publication, see:
•
Industrial Automation Wiring and Grounding Guidelines,
Alllen-Bradley publication 1770-4.1.
•
NEMA Standards publication 250 and IEC publication 60529, as
applicable, for explanations of the degrees of protection provided
by different types of enclosure.