Performing the automatic setup – Rockwell Automation 6186-Mxxx Industrial Monitors User Manual User Manual
Page 35
Publication 6186M-UM001J-EN-P - July 2008
35
Configure the Video Setup Chapter 3
Performing the Automatic
Setup
Using the Auto Setup feature, the monitor samples the input video
signal and accurately adjusts the monitor.
The Auto Setup function works with most screens using reasonable
video content, but Rockwell Automation ships a ScreenSet monitor
setup utility on a CD-ROM to display the best possible image for
setup.
1. Insert the Accessories CD, provided with the monitor, into your
computer’s CD-ROM drive.
2. Start the ScreenSet utility named ScreenSet.exe.
3. Press the Auto button at the rear of your monitor.
The auto adjustment display appears. Your screen may flicker
during the Auto Setup process. When the auto adjustment is
complete, the display will disappear, and your monitor should
be properly adjusted.
IMPORTANT
The ScreenSet monitor setup utility is designed for 32-bit
Windows operating systems only, Windows 95/98/NT
4.0/2000/XP or greater.
TIP
A computer switches through several video modes while
booting. The monitor stores setup information for each video
mode. If you have trouble reading the display during the booting
video modes, you can also press the Auto key during that time.