Bench or tabletop mounting, Required tools, Mounting guidelines – Rockwell Automation 6186-Mxxx Industrial Monitors User Manual User Manual
Page 20
Advertising
20
Publication 6186M-UM001J-EN-P - July 2008
Chapter 2 Installing the Monitor
Bench or Tabletop
Mounting
Use the optional bench/tabletop adapter for monitors, cat. no.
6189V-MBA, to mount your monitor on a bench or tabletop arm.
Required Tools
You need the bench/tabletop adapter and a #2 Phillips screwdriver.
Mounting Guidelines
Observe these guidelines when installing the monitor on an arm.
•
The mounting surface and the mounting arm must be strong
enough to support both the monitor and the mounting
hardware.
•
The interface between the arm and the monitor must meet VESA
FPMPMI 100 mm standards.
•
The mounting location must provide adequate clearance for
positioning and moving the adjustable unit and routing cables.
Advertising