Connecting ac power – Rockwell Automation 6186-Mxxx Industrial Monitors User Manual User Manual
Page 27
Publication 6186M-UM001J-EN-P - July 2008
27
Installing the Monitor Chapter 2
Connecting ac Power
With the ac power adapter, the monitor can use a single-phase ac
power supply providing 90…264V ac at 47…63 Hz.
Power must be available from a grounded outlet nearby. Whenever
possible, connect the monitor to the same ac source that supplies the
computer.
To connect power to the monitor follow these directions.
1. Turn off the main power switch or breaker.
2. Connect the external power-supply cable to the 12V dc
power-input connector on the monitor and secure this
connection by screwing the barrel over the threads.
3. Connect the power cord into the main supply.
4. Restore ac power.
WARNING
Hazardous Location Installation
Secure the ac power cord in the adapter by the metal cage.