Rockwell Automation 6186-Mxxx Industrial Monitors User Manual - Manual (Page 42)

42 Publication 6186M-UM001J-EN-P - July 2008
Chapter 3 Configure the Video Setup
Tools Menu
Tools Menu
Tools Menu
OSD Position
Exit
Left-top Corner Right-top Corner Bottom-left Corner Default-Center
Bottom-right Corner
OSD Time Out
Factory Reset
Tool Functions Description Value Range
OSD Timeout Sets a maximum idle time for exiting the
OSD system if input is not received. 0…60 (default is 30)
OSD Position Adjusts the position of the OSD menu on
the monitor display:
1 - left top
2 - right top
3 - center
4 - left bottom
5 - right bottom 1, 2, 3, 4, 5 (default is 3)
Factory Reset Resets all OSD settings to the factory
defaults.
Exit Exits the Tool menu.
IMPORTANT
All saved settings are lost when you reset OSD settings to the
factory defaults.