Rockwell Automation 6186-Mxxx Industrial Monitors User Manual - Manual (Page 34)

34 Publication 6186M-UM001J-EN-P - July 2008
Chapter 3 Configure the Video Setup
Adjust the Monitor
Brightness To adjust the brightness level of the monitor, use the buttons at the
bottom of the monitor.
Adjust the Monitor Using
Control Keypad To adjust your monitor, use the buttons on the small keypad at the
rear of the unit.
Control Keypad
OSD Key Control Description
Adjust Buttons (+/-) Adjusts the brightness level of the monitor
if pressed while the OSD is off
OSD Key Control Description
On/Off Switch
•
Turns monitor on and off
Menu/Return
•
Opens the OSD and sub-menus
•
Selects the highlighted function
Adjust Buttons
(up and down
arrows)
•
Moves between OSD menus and
submenus
•
Decreases or increases values in OSD
menus and submenus
•
Provides OSD lockout when both up and
down arrows are simultaneously
pressed and held
for 8 seconds
Auto/Exit
•
Starts the Automatic Video Adjustment
function
Auto