Rockwell Automation SP120 AC Drive Demo Unit - Manual (Page 12)

3-4 Using the SP200 AC Drive Demo Unit
Increment the
program parameter
number
1. Press until the PROGRAM LED turns on to
enter program mode.
2. Press until the desired number is displayed.
Decrement the
program parameter
number
1. Press until the PROGRAM LED turns on to
enter program mode.
2. Press until the desired number is displayed.
Increment the
current program
parameter value
1. Press until the PROGRAM LED turns on to
enter program mode.
2. Press while the desired program parameter
number is displayed.
3. Press until the desired value is displayed.
Decrement the
current program
parameter value
1. Press until the PROGRAM LED turns on to
enter program mode.
2. Press while the desired program parameter
number is displayed.
3. Press until the desired value is displayed.
Clear faults
Press .
Table 3.3 – Keypad Operation
Desired Action User Steps
PR OG
PR OG
PR OG
PR OG