Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 117)

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 117
Loading and Unloading Chapter 3
Automatically Printing Reports after Unloading
You can select reports to automatically send to a printer after unloading data from
the Enpac. The reports contain information on the list of measurements
unloaded. See the Emonitor online help for more information on printing
reports and plots.
1. Choose Tools > Load/Unload. The Load/Unload dialog appears.
2. Make sure the correct data collector appears in the Set up collector button.
If not, see Set Up the Data Collector for Communication on page 102 .
3. Click the Unload Options button. The Unload Options dialog appears.
4. Check the Print reports checkbox and then select the reports you want
Emonitor to run automatically after unloading data.
5. Click OK.