Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 238)

238 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 8 Balancing Application
To Load the Previous Balance Run
When you open the Balancing program (choose Balance from the Main Menu
screen), the Enpac 2500 may ask if you want to reload the previous balance run,
as shown below.
Press F2 (Yes) to load the previous balance. If you want begin a new balance, press
F3 (No).
To Reload a Balance with the Memory Function
You can load a previously stored balance anytime the Memory function is
displayed on the screen.
1. Press F3 (Memory). The Memory - Internal screen appears.
2. Highlight the balance file that you want to load and press F3 (Load).
IMPORTANT This will overwrite the current balance setup and data.
List of stored balances.