Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 40)

40 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 1 The Enpac 2500 Data Collector
Setting Up the Enpac 2500
Data Collector Before you begin to take readings, you need to configure the instrument
parameters by using the Setup Utility, Instrument Configuration and Data
Collection screens.
Configure the Data Collector
By using the Setup Utility, you can configure the global options for your data
collector.
Follow these steps to configure the data collector.
1. Select Setup Utility from the Main Menu and press Enter.
The Setup screen appears.
2. Review the default values and edit if necessary.
3. When finished, press F4 (Apply) to return to the Main Menu.
For the Route data to be accurately
time based, you must set the date and
time before leaving this screen.