Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 246)

246 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 9 Time Recorder Application
Recalling a Setup You can recall a previously saved setup and use it to record another measurement.
The setup may have been saved only as a setup, or may have been saved with the
recorded measurement.
Refer to Saving a Time Recorder Setup and Measurement on page 244 .
1. Connect the transducer to the Enpac 2500.
Refer to Connect a Transducer to the Data Collector on page 120 .
2. Attach the transducer(s) to the machine case or structure.
3. Select Recorder on the Main Menu and press the READ/OK key. The
Recorder screen appears.
4. Select Recall and press the READ/OK key. The Recorder - Load Setup
screen appears.
5. Highlight the filename that you want recall and press F4 (Open).