Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 192)

192 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 6 Installing Optional Extension Modules
The Extension Manager screen appears.
3. Select the extension module you want to uninstall and press F3 (Select).
F3 (Select) toggles the selection on and off.
A checkmark appears next to that extension module.
4. Press F1 (Uninstall).
A confirmation message appears.
5. Make sure your installation card is inserted into the unit.
TIP You must have the correct extension module card inserted to remove that
option. If the wrong card or no card is inserted then a message displays telling
you to insert the correct card.
This screen lists the extension
modules currently installed and
on the unit.