Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 282)

282 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 10 Run Up/Coast Down Application
Reviewing Run Up/Coast
Down Measurements You can review previously saved Run Up/Coast Down measurements with the
Enpac 2500. The Enpac saves the recorded data in the form of a time waveform
(.wav file).
1. Select RUCD on the Main Menu and press the READ/OK key.
The RUCD screen appears.
2. Select Review Data and press the READ/OK key.
The RUCD - Review Data screen appears.
3. Highlight the filename that you want review and press F4 (Open).
If you select a .wav file, the RUCD - WAV Setup screen appears (see
below). Otherwise the appropriate plot setup screen appears. Refer to the
appropriate section in the chapter for details.