Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 40 Drive over DeviceNet Quick Start - Manual (Page 10)

10 Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012
Preface
How Hardware is Connected
This quick start demonstrates the following Logix5000 control system that uses PowerFlex 40
drives on a DeviceNet network.
Required Software
To complete examples in this quick start, you need this software.
Software Required Software Version, min Required for This Task
RSLogix 5000
20.00.00 or later
(1)
(1) RSLogix 5000 software, version 20.00.00 or later, is required for use of this quick start because the example Logix5000 controller, and associated tasks, described herein are completed in a
CompactLogix 5370 L3 control system. CompactLogix 5370 control systems require RSLogix 5000 software, version 20.00.00 or later. If you connect a PowerFlex 40 drive over a DeviceNet network in a
Logix5000 control system that uses a different controller, the minimum software version may differ.
Change RSLogix 5000 projects to use
PowerFlex 40 drives.
RSNetWorx for DeviceNet 11.00.00 Modify DeviceNet configuration file to
include the PowerFlex 40 drives described in
this publication.
DeviceNet Tag Generator 20.00.00 or later Generate new programs and tags in your
RSLogix 5000 project.
Logix5000
Controller with
DeviceNet
Scanner Module
Computer Connected to
Logix5000 Controller
PowerFlex 40 Drive
with 22-COMM-D
DeviceNet Adapter
DeviceNet Power Supply
1606-XLDNET8