Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 40 Drive over DeviceNet Quick Start - Manual (Page 27)

Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012 27
Create DeviceNet Network Software Files Chapter 2
3. Click Browse.
When the Device Selection dialog
box appears, browse to the 1769-
SDN scanner module over an
EtherNet/IP network or USB
connection.
This example uses an EtherNet/IP
network connection.
4. Under the AB_ETHIP-1 driver,
expand the path to the 1769-SDN
scanner module as shown in the
example graphic.
5. Click OK.
6. If you receive a linking device
warning, click Yes.
The Node Commissioning dialog
box is populated with the
1769-SDN module’s current
settings.