Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 40 Drive over DeviceNet Quick Start - Manual (Page 22)

22 Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012
Chapter 2 Create DeviceNet Network Software Files
• These tasks described in Chapter 1, Prepare the PowerFlex 40 Drive Hardware on page 13 :
– Mount the Drive
– Wire Power to the Drive
– Set the Drive Operation, Node Address, and Communication Rate
– Connect the DeviceNet Adapter to the Drive
– Connect the Drive to the DeviceNet Network
What You Need
You need RSNetWorx for DeviceNet software to complete the tasks in this chapter.
Follow These Steps
Associate the
DeviceNet
Configuration File
with an RSLogix
5000 Project
page 33
Create a
DeviceNet
Scanlist
page 35
Set the 1769-SDN
Scanner Module’s
Node Address
page 26
Register an EDS
File - Optional
page 23
Create a
DeviceNet
Configuration File
page 29