Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 40 Drive over DeviceNet Quick Start - Manual (Page 15)

Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012 15
Prepare the PowerFlex 40 Drive Hardware Chapter 1
Mount the Drive
Mount the drive upright on a flat, vertical, and level surface with considerations for minimum
mounting clearance, ambient operating temperature, debris protection, and storage.
To complete the tasks described in this chapter, mount the 22B-V2P3N104 drive on a DIN rail.
For complete mounting instructions, see the PowerFlex 40 Drives User Manual, publication
22B-UM001 .
Wire Power to the Drive
1. Remove the cover.
WARNING: Verify that all incoming power is turned off before wiring power.
Do not apply incoming power before connecting the DeviceNet adapter to the drive.