Rockwell Automation EK-44750C Enwatch Unit - Manual (Page 23)

Rockwell Automation Publication GMSI10-IN001A-EN-P - May 2013
Enwatch Unit 23
Order Normalized Measurements
Enable order normalized measurements in the collection specification.
1. In the Emonitor software, select Setup>Collection.
2. Edit an existing collection specification or create a new one.
3. Verify that Order normalization is checked.
The Enwatch unit then finds the machine speed and applies it to the
number of orders to select the proper sampling rate before collecting data.
IMPORTANT
You must also define a trigger channel for the Enwatch
channel so that the Enwatch unit can find the machine
speed.