Rockwell Automation EK-44750C Enwatch Unit - Manual (Page 30)

Rockwell Automation Publication GMSI10-IN001A-EN-P - May 2013
30 Enwatch Unit
Validating Enwatch Measurements
To add or edit an Enwatch unit, you can set up a validation function to allow the
driver to check the channel’s data before updating the database. This function can
be used to filter unwanted data when the machine is not running, or when some
other parameter is not within the correct bounds.
Click the Channel tab, then double-click in the Validate column to set up the
validation parameters.
You can reference any channel in any order.