Rockwell Automation EK-44750C Enwatch Unit - Manual (Page 26)

Rockwell Automation Publication GMSI10-IN001A-EN-P - May 2013
26 Enwatch Unit
5. Enter a Name and click OK.
6. Select the new data source, and click Edit.
The Setup window opens.
7. Right-click Emonitor Online and select Insert.
The Insert Unload Station window opens.
8. Select Enwatch Unload Station and click Next.
The General tabs opens.
9. Enter the IP address of the computer on which the Online Data
Management Console is installed (not the IP address of the Enwatch
board), or click Browse to find the computer name.
10. Add a description of the computer and click Finish.
The Enwatch Unload Station icon is added to the window.
The red OFF indicates that there are no Enwatch units or there is no
connection to an Enwatch unit.