Rockwell Automation EK-44750C Enwatch Unit User Manual
Page 28
Advertising
Rockwell Automation Publication GMSI10-IN001A-EN-P - May 2013
28 Enwatch Unit
2. Select the Channel tab.
This tab is used to map the Enwatch channel to the measurement point in
the database.
3. On the Channel tab, double-click the first square to the left of the channel
number.
A connection to the database opens and the hierarchy tree from the
Emonitor database is displayed.
4. Expand the tree and select the measurement point to which you want to
map the Enwatch channel and click OK.
The machine name and location are populated. All measurement points
associated with the machine name are collected by the Enwatch board.
5. Click Finish.
Advertising