Enwatch unit overview, Hardware overview – Rockwell Automation EK-44750C Enwatch Unit User Manual
Page 3
Rockwell Automation Publication GMSI10-IN001A-EN-P - May 2013
Enwatch Unit 3
Enwatch Unit Overview
The following sections give an overview of the hardware and electrical
components of the Enwatch® unit.
Hardware Overview
The Enwatch unit contains a printed circuit board and power supply on a
mounting base plate and housed in a metal enclosure. Use the key on the door of
the enclosure to access the enclosure.
The unit is pre-wired with mains input terminals connected to an internal 24V
power supply. The power supply and internal wiring are fitted to a mounting
base.
The output of the 24V power supply connects to the printed circuit board. The
circuit board is mounted on six stand-offs to the mounting base plate. The
printed circuit board and terminal connectors are packed separately.
To correctly install the unit, follow the steps in
.