Rockwell Automation WebPak 3000 DC Drives Hardware Reference, Installation and Troubleshooting - Manual (Page 30)

2-18 WebPak 3000 DC Drive Hardware Reference
2.5.8 Wire the I/O Expansion Board
The I/O Expansion board provides 8 inputs and 8 outputs. These inputs and outputs are
described briefly in the sections that follow. Refer to the WebPak 3000 software reference
manual (D2-3444) for complete parameter descriptions.
Digital Inputs
64 CURRENT MEMORY
63 TENSION ON
62 DIAMETER RESET
61 +24 V
Frequency Input
(0 - 250 kHz)
Analog Inputs
Analog Outputs
(+/-10V or 4-20 mA)
Digital Outputs
DIG OUT 1
DIG OUT 1 COM
DIG OUT 2
DIG OUT 2 COM
5 kohm 5 kohm
33 10 VDC
34 GND
50 TENSION SETPOINT
51 TENSION SETPOINT COM
52 TENSION/DANCER FDBK
53 TENSION/DANCER FDBK COM
39 FREQ IN A
40 FREQ IN A
41 COM
60 DIAMETER SELECT B
59 DIAMETER SELECT A
58 +24 V
65 24 V COM
FREQ OUT A 42
FREQ OUT A 43
COM 44
ANLG OUT 3 54
ANLG OUT 3 COM 55
ANLG OUT 4 56
ANLG OUT 4 COM 57
+
-
1.3 kohm max.
V (ext.:)
32 VDC max
Frequency Output
(0 - 250 kHz)
24 V
66
67
68
69
ext.
supply
ext.
supply
Figure 2.9: I/O Expansion Board Terminal Strip Connection Diagram