Rockwell Automation Logix5000 Systems: Connecting PowerFlex 40 Drives over an EtherNet/IP Network Quick Start - Manual (Page 18)

18 Rockwell Automation Publication IASIMP-QS029A-EN-P - February 2012
Chapter 1 Prepare the PowerFlex 40 Drive Hardware
5. Install the drive cover onto the
drive using both cover fasteners
to ground the adapter.
6. Connect the adapter to the
EtherNet/IP network via the
EtherNet/IP port at the
bottom of the drive.
7. Apply power to the
PowerFlex 40 drive.
0.5…0.6 N
m
(4…5 lb
in)
1 2
3 4
5 6
7 8