Configure the ethernet/ip adapter, Configure the, Ethernet/ip adapter – Rockwell Automation Logix5000 Systems: Connecting PowerFlex 40 Drives over an EtherNet/IP Network Quick Start User Manual
Page 19
Rockwell Automation Publication IASIMP-QS029A-EN-P - February 2012
19
Prepare the PowerFlex 40 Drive Hardware Chapter 1
Configure the EtherNet/IP Adapter
The PowerFlex 40 EtherNet/IP network adapter requires a network IP address to operate on an
EtherNet/IP network. Use the BOOTP/DHCP server to assign an IP address.
1.
Retrieve the MAC ID you recorded in step 1 on
2.
Start the BOOTP/DHCP utility.
3.
From the Tools menu, choose
Network Settings.
4.
Type the Subnet Mask of
the network.
The Gateway address, Primary
and/or Secondary DNS
address, and Domain Name
fields are optional.
5.
Click OK.
The Request History panel appears with the hardware addresses of all devices issuing
BOOTP requests.
6.
Select the appropriate device,
that is, the device with the
MAC ID that matches your
PowerFlex 40 drive.