Rockwell Automation Logix5000 Systems: Connecting PowerFlex 40 Drives over an EtherNet/IP Network Quick Start - Manual (Page 24)

24 Rockwell Automation Publication IASIMP-QS029A-EN-P - February 2012
Chapter 2 Add the PowerFlex 40 Drive to an RSLogix 5000 Project
4. Enter a name for the drive.
5. Enter the same IP Address for the
22B-V2P3N104 drive in the
project as you assigned in
Configure the EtherNet/IP
Adapter on page 19
.
6. Click Change.
7. On the Module Definition dialog
box, disable keying and click
Match Drive.
8. On the Full or Partial Match dialog
box, click Partial.
9. On the Connect to Drive dialog
box, navigate to the drive.
10. Select the drive and click OK.