Rockwell Automation Logix5000 Systems: Connecting PowerFlex 40 Drives over an EtherNet/IP Network Quick Start - Manual (Page 31)

Rockwell Automation Publication IASIMP-QS029A-EN-P - February 2012 31
Add the PowerFlex 40 Drive to an RSLogix 5000 Project Chapter 2
Test the 22B-V2P3N104 Drive Tags
1. Move the controller switch to
RUN mode.
2. Double-click Controller Tags.
The Monitor Tags tab appears.
3. Change the O.FreqCommand
tag to 10.
The value 10 equals 1.0 Hz.
4. Change the O.Start tag to 1.
The drive begins to run. The
drive’s display register its speed until it reaches 1.0 Hz.
RUN
REM
PROG