Rockwell Automation Logix5000 Systems: Connecting PowerFlex 40 Drives over an EtherNet/IP Network Quick Start - Manual (Page 9)

Rockwell Automation Publication IASIMP-QS029A-EN-P - February 2012 9
Preface
Where to Start
Prepare the PowerFlex 40
Drive Hardware
page 13
Add the PowerFlex 40 Drive
to an RSLogix 5000 Project
page 21
Prerequisite Tasks
Described in Before Using This Publication on page 5 .
1. Prepare the Logix5000 control system hardware
2. Prepare the computer
3. Configure the networks
4. Create an RSLogix 5000 project
Logix5000
Controller