Rockwell Automation Logix5000 Systems: Connecting PowerFlex 40 Drives over an EtherNet/IP Network Quick Start - Manual (Page 26)

26 Rockwell Automation Publication IASIMP-QS029A-EN-P - February 2012
Chapter 2 Add the PowerFlex 40 Drive to an RSLogix 5000 Project
Download the Project to Your Logix5000 Controller
1. Save your changes.
2. Move the controller’s mode switch
to Program.
3. Click the Controller Status
icon and choose Download.
4. Click Download.
The project downloads to
the controller.
5. Put the controller mode switch
in the REM position and
change the project to Remote
Run mode.
IMPORTANT If you receive a fault message on
your 22B-V2P3N104 drive, press
on the keypad to clear
the fault.
RUN
REM
PROG