Rockwell Automation Logix5000 Systems: Connecting PowerFlex 40 Drives over an EtherNet/IP Network Quick Start - Manual (Page 7)

Rockwell Automation Publication IASIMP-QS029A-EN-P - February 2012 7
Preface
Configure the
networks Complete required tasks associated with the networks used in your application, such as assigning an IP address
to the controller or a communication module in your Logix5000 control system.
Create an
RSLogix 5000 project Project used with your Logix5000 controller that includes all desired control system components and necessary
programming, for example, adding ladder logic to test tasks associated with individual system components.
Table 1 - Required Tasks to Complete Before Using this Quick Start
Task Description