Autocue WinCue Pro News Version 1.3 - Manual (Page 115)

WinCue Pro News User Guide PC90 Stands • 115
A control panel can be brought up to control the stand at any time by selecting
Control Panels from the Automation menu. The previously configured device will
appear on a sub-menu. Click on this and a panel like the one below will appear.
Click on Activate to start controlling the stand. Use the height slider bar to control the
height of the PC90 stand. This is a useful way to confirm that the connection between
the computer and the stand is working.
Note: While the panel is active WinCue cannot control the stand whilst prompting.
Use the panel only to manually control the stand. When the stand is to be controlled
through prompting close the control panel.
10.4 Formatting the scripts for use
Inserting a special control into a script will control the stand height. When this point is
reached in the prompting the stand will be set to the height that this control
specifies.
When editing a script place the cursor at the point where the stand should change
height. Select Automation Element from the Insert menu. Select PC90 Stand Control
and the following dialog will appear: