Autocue WinCue Pro News Version 1.3 - Manual (Page 89)

WinCue Pro News User Guide Scroll Controls • 89
8.4 Connecting a Foot Control
At the rear of the multi-button scroll control is a 15 pin D connector for attaching a
foot scroll control and a button to select between foot and hand control operation.
When this button is pressed in the foot scroll control can be used to prompt the text.
Otherwise the multi-button scroll control can be used.
The foot control can also be connected direct to the IMT 9 pin connector for stand-
alone use.
The foot scroll control is used for controlling the speed and direction of the prompted
text only. All other functions such as next marker and reset rundown are available by
using the buttons of the multi-button scroll controller.
The red button is used for changing the direction of the prompted text. The foot
pedal controls the speed.