Autocue WinCue Pro News Version 1.3 - Manual (Page 39)

WinCue Pro News User Guide Rundown Files • 39
If you wish to see only the Rundown windows, then close all the Script Editors
windows. Choose Window, then Tile Horizontally or Tile Vertically from the menu. The
tilling can be horizontal or vertical depending on what you prefer. To make a window
active choose the corresponding Rundown name from the window and click on it.
4.3.2 Cascading Windows
Cascading windows arranges all the open windows one behind each other with their
titles visible. The top window is the only one that can be seen complete.
Once again if only the Rundowns are to be cascaded, close all the script editors.
Choose Window, and then Cascade from the menu. All the open windows are
stacked so their titles are visible.
To bring a chosen rundown to the front, choose click on the rundown name in the
stack or click on title on the status bar.
4.3.3 Arranging Icons
All the open windows can be minimised to icons. These icons can become
disorganised; Arrange places them in an orderly fashion.
Choose Window, then Arrange from the menu. All the icons will be arranged in an
orderly fashion at the bottom of the WinCue Pro News window in the Status bar.
4.3.4 Moving Stories Between Rundowns
Stories can be moved between Rundowns very easily using the drag and drop
facility in WinCue Pro News Drag-and–drop is the easiest way to move a story
between Rundowns. Select the story you want to move by pointing to it and hold
down the left-hand mouse button. When the drag and drop pointer appears, drag
the dotted insertion point to the new location. Release the mouse button to drop the
story in its new place in the Rundown.
4.4 Prompting Mode
When WinCue Pro News enters the prompting mode the stories in the chosen
rundown can be scrolled. The prompter operator controls the speed at which the